GMG Marine Plywood is manufactured as per IS:710 Boiling waterproof standards and is made from special hardwood veneer. It is bonded with undiluted Phenol Formaldehyde Resin at extremely high temperature and pressure. Therefore, this plywood can take extreme changes in temperature, humidity and alternate wetting and drying which are all the prerequisites for plywood used in marine applications. Being powder proof guarantees protection against borer & ermites. Due to the nature of the application, it is made to resist fungal and micro bacterial attacks also. This marine plywood is strong enough to withstand the excess load, thrust and vibrations. It is dimensionally stable and an ideal choice for high-quality projects.

GMG Fire Retardant Plywood meets IS 5509-2000 standards offering resistance to ignition, surface spread of flames and flames penetration by suitable chemical treatment. Fire retardant characteristics are a very important property to prevent propagation of fire at the initial stages. Flame penetration: The time taken for flame penetration shall not be less than 15 minutes for every 6mm thickness. Rate of burning: The time taken to lose weight from 30 percent shall not be less than 20 minutes. Flammability: The time taken for second ignition shall not be less than 30 minutes.

General-purpose plywood is manufactured as per the specifications of IS:303. It is treated with the latest derived preservatives. The chemical is mixed with resin to protect it from inside and after pressing the treatment is reapplied to shield it from external factors. It has a higher tolerance to humid environments and provides safety against twisting, warping, bores and termites. It has a strong core that makes it suitable for tough handling and rough environments. It is made using both hardwood core veneer and poplar veneer.

GMG Block Boards are made in Moisture Resistant & Boiling Water Resistant Grade, duly bonded with Melamine Urea Formaldehyde & Fortified Phenol Formaldehyde Synthetic Resin respectively. It has high resistant properties against borer and termite attacks. The wooden battens are thoroughly seasoned in scientifically run seasoning kiln plants and then cut with great precision to obtain uniform thickness. These battens are systematically arranged and utmost care is taken to avoid any extra gap between the battens. It is available with Masterwork, Excellence and Invention series. GMG Blockboard are available in both poplar wood filler and pinewood filler.

GMG flush doors are made out of high-density wood to make them exceptionally durable and dimensionally stable with excellent tooling and finishing properties. The doors are made with chemically treated seasoned hardwood battens and frames. GMG flush doors come with Masterwork Series only.
Great Aquarius Flush doors are bonded with special quality Phenol formaldehyde synthetic resin as per the guidelines of IS: 2202. The flush doors are manufactured under strict quality control conditions that exceed the ISI specifications. GMG Doors are available in waterproof Shutter doors, Laminated doors, Veneered doors.

WPC board is a mixture of wood fiber/wood flour and thermoplastics. It is a highly durable and safe material used for construction purposes. WPC boards are also prepared from inorganic fillers and plastic composites. Wood and plastic composite are also used as a strong, high-quality coating option. WPC Board is highly suitable in interior applications having wet conditions, high load-bearing surfaces, high traffic & high-temperature areas.

GMG Film face Plywood is compact and toughened quality structural plywood. This is the most elegant, durable, superior film faced densified shuttering Ply. Its strength factor exceeds to withstand any amount of load of concrete and the vibration caused by pouring the concrete. It does not degrade against wear and tear, warp less and are twist free. Its protective properties resist attack from termite, fungus, rot & other destructive elements.

(Medium Density Fibreboard) is constructed by condensing lots of small wood fibers together with glue. It does not have visible wood grains or knots because it is made up of small wood fibers. Furniture or other objects created using MDF are lot less expensive as compared to wood thus it's the perfect economical choice
MDF (Medium Density Fibreboard) is wood fibre-based panels. One of the most attractive aspects of MDF is its homogeneous, one-piece construction. The board density of GMG MDF is better than most other products on the market because our board is made from hardwood. Using special German technology, our Boards have the best routing characteristics because they are pressed in such a way that compression pressure reaches the board's core, which is critical for high-quality routing. We also produce in EO, E1 & E2 Grade.